TP-Link Archer CR700 User Manual page 76

Archer CR700
Applications - The applications you want to use.

Triggering Port - The port for outgoing traffic. An outgoing connection using this port will

trigger this rule.
Triggering Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all

protocols supported by the router).
External Port - The port or port range used by the remote system when it responds to the

outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of
ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085,
3010-3030.
External Protocol - The protocol used for External Port, either TCP, UDP, or ALL (all

protocols supported by the router).
Enable – Click the

will become .
Modify – Click the

you can click the
To add a new rule, follow the steps below.
Add button.
1. Click the
2. Select an available interface from the Interface Name drop-down list.
3. Click the View Service button to select the application you want to use. Then the number of
the Triggering port and External Port will be auto-configured according to your selection. If
the View Service menu does not list the application that you want to use, enter the
Application, the number of the Triggering port and External Port.
4. Select the protocol used for this application in the Triggering protocol and External
Protocol drop-down list, either TCP, UDP, or All.
5. Enable the Enabled this entry checkbox.
6. Click the OK button.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
icon to enable the function. If this function has taken effect, the icon
icon to edit the corresponding entry. If you want to delete this entry,
icon.
66