Primary Network - TP-Link Archer CR700 User Manual

Archer CR700
Power – Here you can specify the transmit the power of the modem router. You can select

25%, 50%, 75% and 100% which you would like. 100% is the default setting and is
recommended.
Mode – Select the desired mode.

11b/g mixed: Select if you are using both 802.11b and 802.11g wireless clients.
11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
Select the desired wireless mode. It is strongly recommended that you set the Mode to
11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the
modem router.
BandWidth - Select the channel width from the drop-down list

which can adjust the channel width for your clients automatically.
Channel - Select the channel you want to use from the drop-down list of Channel. This field

determines which operating frequency will be used. It is not necessary to change the wireless
channel unless you notice interference problems with another nearby access point.

Note:
If 11b/g mixed is selected in the Mode field, the BandWidth selecting field value will become 20M
hz, and which is unable to be changed.
Click the Save button to save the settings.

5.4.2 Primary Network

Choose menu "Advanced → Wireless 2.4G → Primary Network", You can configure the
wireless 2.4G primary network.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
.
39
The default setting is Auto,