Lan Settings - TP-Link Archer CR700 User Manual

Archer CR700

5.3.2 LAN Settings

Choose "AdvancedNetworkLAN Settings" menu, and you will see the LAN screen (shown
in Figure 5-10). Please configure the parameters for LAN ports according to the descriptions
below.
LAN Settings:
IP Address - Enter the modem router's local IP Address, then you can access to the

Web-based management page via the IP Address, the default value is 192.168.1.1.
MAC Address - The physical address of the modem router, as seen from the LAN. The

value can't be changed.
DHCP Settings:
DHCP Sever – Check the box to enable this function. If DHCP Server is enabled, the modem

router will work as a DHCP server, which provides the TCP/IP configuration for all the PC(s)
that are connected to it on the LAN.
-
MAC Address The MAC address of the DHCP client

C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-10
33