To Set External Headset Ringing (Optional); To Set The Call Waiting Volume - NEC DT900 Series User Manual

Hide thumbs Also See for DT900 Series:
Table of Contents

Advertisement

2
3
4
5
6
7

To set external headset ringing (Optional)

1
2
3
4
5
6

To set the Call Waiting volume

1
2
3
4
5
6
DT900/DT900S Series Phone User Guide
Thread the cord through the groove.
b.
Press the Menu key on the phone.
3
Select
User Settings.
2
Select
Headset.
1
Select
Enable/Disable.
2
Select
Enable.
b
Press Enter
on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
You can set your phone to ring only through your external headset. The phone will not
ring from the telephone speaker when you have it set to ring to the headset.
Hold reminder tone, soft ring, ringer volume, and preview of the User
Note:
Adjustable Ringtones on selection may not be supported by the headset.
They are only played on the phone speaker when Headset Ringing is set to
Phone or Phone and Headset.
Press the Menu key.
3
Select
User Settings.
2
Select
Headset.
2
Select
Ringing.
Do one of the following:
• To enable ringing on the headset only, select
• To enable ringing on the headset and the phoneset, select
b
Press Enter
on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
The setting defaults to
Note:
The Call Waiting Volume settings allow you to specify the call waiting tone volume for
the headset.
The range is 0 (no tone) to 19 (maximum tone volume). The default is 19.
Upon entering this screen, the keypad is locked in numeric entry mode. You cannot
change the keypad entry mode in this screen.
Press the Menu key.
3
Select
User Settings.
4
Select
Tone Volumes.
1
Select
Call Waiting Volume.
To change the volume level, press the Delete softkey and use the telephone keypad to
enter new volume level.
b
Press Enter
on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
The setting defaults to 19 (maximum tone volume).
Note:
B A S I C S E T U P W I T H T H E M E N U S A N D C U R S O R PA D
2
Headset.
1
Phone.
3
Phone and Headset.
4-41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt900s series

Table of Contents