Lexmark Printer User Manual page 218

GoldSansMM
GoldSerifMM
Helvetica
PostScript emulation also has a backward compatibility mode that changes the
metrics of 8 of the resident fonts to match the fonts in the Lexmark Optra S family of
printers. The 8 fonts are:
AntiqueOlive
AntiqueOlive-Italic
AntiqueOlive-Bold
LetterGothic
Note:
Your printer defaults to the forward compatibility mode and the Lexmark PostScript
driver uses this mode. For backward compatibility with the Lexmark Optra S family of
printers, use the latest version of the Lexmark Optra S driver which sends the
PostScript command to switch to backward compatibility mode. (The original Lexmark
Optra S driver does not send this command.)
See Table 4-6 to determine which Lexmark Optra S driver you should use.
Table 4-6: Lexmark Optra S Drivers
If you need the Lexmark Optra S driver for ...
Windows 2000, Windows XP
Windows NT 4.0
Windows 9x, Windows Millennium Edition (Me)
Windows 3.x
The PostScript commands to switch the compatibility modes are:
Forward compatibility:
NewCenturySchlbk-Roman
NewCenturySchlbk-Italic
NewCenturySchlbk-Bold
LetterGothic-Italic
LetterGothic-Bold
Marigold
Univers-Bold
In backward compatibility mode, the LetterGothic-BoldSlanted font is
unavailable.
4-13
ZapfDingbats
Use ...
Version 7.2 or later of LEXPSNT
Version 1.8 or later of LEXPSNT
Version 4.32 or later of LEXPS
Version 4.02 or later of LEXPS
(temporary, changes the PostScript job only)
(permanent, changes the default in NVRAM)
PostScript