Lexmark Printer User Manual page 159

Printer Unique Variables for PostScript Emulation
The following variables are unique in some printers and are supported in PostScript
emulation only.
The
For example:
To determine which variables your printer supports, see Table B-6 on page B-12.
Table 3-8: Printer Unique Variables for PostScript Emulation
Variable
LPICTUREGRADE
LPSFONTPRIORITY
Printer Unique LRESOURCE Variables
Use the following variables when additional storage devices are installed.
The
and SET commands must be specified as
For example:
Values for
Using the DEFAULT command to modify any of these variables forces a write to flash
or disk if resource collection mode is set to On before the command is executed. The
DEFAULT command causes a PJL Reset.
Function Selections
PictureGrade ON, OFF
Font Priority RESIDENT, FLASHDISK
,
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
The identifier that categorizes the file, such as
macros or
3-52
parameter should be specified as
parameter of the DEFAULT, INQUIRE, DINQUIRE,
are:
, , or (case insensitive)
for PCL symbol sets
PJL
: .
Factory Default
ON
RESIDENT
.
is case
for PCL