Saving Settings - Lexmark 4800 Series User Manual

Within each menu item or submenu, there are choices called values. For instance, the Color menu item has
values of Color and Black & White.
•
Press or repeatedly to scroll through menu items or submenus.
•
Press or repeatedly to scroll through values.
•
In some menus, you can press
copy job, or scan job. The control panel menu screen indicates when you can press
•
Before starting a job, if you want to make a change after you see the preview, press
choices or settings for this single job. It returns you to the menu so you can make changes. For example, if
you were in the Copy Mode menu, press
to make additional changes.
•
Press repeatedly to return to previous menus.
Pressing
values you selected to be saved. For more information, see "Understanding and using default settings" on
page 28.
Understanding and using default settings
Saved settings are called user default settings because you, the user, selected the values and saved them. The
control panel refers to them as default settings.
Notes:
•
An asterisk (*) appears next to a default setting. You may notice these when you scroll through the values in
submenus.
•
Default settings remain in effect until you change them. To change them, access the Change Default
Settings submenu again for the appropriate menu, choose different value selections, and then
press to save these values as the new default settings.
If you want to start a job without making any changes, press
is an easy and quick way to start printing any job.
Note: If you do not want to use the default settings, you can enter the menu, make different choices for the values
in the submenus, and then press

Saving settings

In a setting menu, an * appears next to the default setting. To change the setting:
1
From the control panel, press
Maintenance.
2
Press .
3
Press or , or press
4
Press to select each setting you want.
Note: Pressing also shows a preview in the Copy mode.
5
Press while Yes is highlighted, or press
main menu. An * appears next to the saved setting.
Note: The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off. The Photo
settings will not time out after two minutes of inactivity or turning off the power but will return to the default settings
when a memory card or flash drive is removed.
to see a preview of the job before you start it. A job could be a print job,
in some submenus, such as the Change Default Settings submenu, causes the
. Your job prints using the values you chose for this job only.
or repeatedly to choose Copy, Photo, Print Files, Scan, Setup, or
or repeatedly to choose the setting you want.
for the preview. Press
. The job prints based on the default settings. This
repeatedly to save all temporary settings and return to the
28
for a preview.
to adjust any
to return to the Copy Mode menu