Pto Switch; Light Switch - Jacobsen LF550-H-T4F Safety, Operation And Maintenance Manual

CONTROLS 6

6.2.4 PTO SWITCH _____________________________________________________________

The PTO switch is a 2-position knob type switch to engage and to disengage the cutting units. The
PTO switch must be in the OFF (down) position to start the engine.
Pull on the red knob to move the switch to the ON position. When the PTO switch is in the ON
position, the cutting units are engaged and the joystick is set to automatic mode. When the cutting
units are lowered, the reels will start to turn when forward travel starts. When the cutting units are
lifted or forward movement stops, the reels will stop.
6.2.5 HORN SWITCH ____________________________________________________________
Press the front of the switch to use the horn.

6.2.6 LIGHT SWITCH ____________________________________________________________

The light switch controls the operation of the headlights. Press the front part of the switch to turn on
the headlights. Press the rear part of the switch to turn off the headlights.
28