Printing Photos From A Digital Camera Using The Pictbridge Menu - Lexmark 350 Series User Manual

4
Press .
5
Press or repeatedly until Print Camera Selections is selected. This option appears only when there
is a valid DPOF file on your memory card.
6
Press .
7
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.

Printing photos from a digital camera using the PictBridge menu

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the PictBridge
menu on the printer to print photos.
1
Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see "Loading paper" on page 19.
2
Connect a PictBridge-enabled digital camera. For more information, see "Connecting a PictBridge-enabled digital
camera" on page 22.
3
If no selections were specified on your digital camera beforehand, press
printer. For more information, see "Using the PictBridge menu" on page 16.
4
After making your selections, press
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.
to print.
Printing photos
29
to access the PictBridge menu on the