Lexmark 310 Series Setup Instructions

Setup troubleshooting

Symptom Diagnosis
The Power light is not lit Is the power cord pushed all the way into the printer?
Is the printer connected to a working electrical outlet?
Memory card is not recognized Is the memory card damaged?
by the printer
Is the memory card inserted correctly?
Is there more than one memory card inserted at the
same time.
Are you using a supported memory card type?
Do you have a PictBridge-enabled digital camera
connected to the printer.
The control panel displays text Did you select a language?
in the wrong language
Need Questions?
ink?
• Refer to your User's Guide.
• Visit our Web site: http://
support.lexmark.com/.
• Call us at 1-800-332-4120.
Monday–Friday (9:00 AM–9:00 PM EST)
Saturday (Noon–6:00 PM EST)
Note: Phone number and support times
may change without notice.
• 33
Record the following information (located on
• 35
your store receipt and the back of your
Save this sheet for future reference.
PN 20C0070 EC 9J0003
© 2004 Lexmark International, Inc. All rights reserved.
Solution
1 Disconnect the power cord from the wall outlet, and then from the printer.
2 Reconnect the power cord by pushing it all the way into the connector on the
printer, and then into the wall outlet.
3 Press Power.
1 Connect the printer to an electrical outlet that other electrical devices have been
using.
2 Press Power.
Verify that there is no damage to the memory card.
Insert the memory card correctly. For help, see "Inserting memory cards" in the User's
Guide.
Only one memory card may be used at one time.
Remove the second memory card.
For supported memory cards, see "Supported memory cards" in the User's Guide.
Disconnect the PictBridge-enabled digital camera from the printer.
1 Press Menu.
2 Press the down arrow button until you reach the last item.
3 Press the up arrow button twice.
4 Press + or - to scroll to the language you want.
5 Press Select to save your choice.
printer) and have it ready when you contact
us so that we may serve you faster:
Machine Type
number_____________________________
Serial
number_____________________________
Date
purchased___________________________
Store where
purchased___________________________
3 1 0
s e r i e s
Setup
Instructions
www.lexmark.com
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized replacement power
supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily accessible.
• Refer service or repairs, other than those described in the user documentation, to a professional service
person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply
*20C0070*