Printing Photos Using The Control Panel; Printing A Photo Or Selected Photos - Lexmark 350 Series User Manual

6
Use any of the following tools:
•
Red Eye Reduction
•
Auto Fix
•
Crop
•
Rotate
7
After using the editing tools, click Done.
8
Save the edited photos as new, separate files or replace the original files with the edited ones. You can also choose
Continue without saving to discard your changes.
9
Select a size for each photo and the paper size in the printer. To print borderless photos, you must select a photo
size equal to the size of the paper loaded.
10
Select the Number of copies.
11
Click Print Now.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.

Printing photos using the control panel

Printing a photo or selected photos

Use these instructions to view photos, and select one or more photos for editing and printing.
1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see "Loading paper" on page 19.
2
Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting
a flash drive" on page 21.
3
Press or repeatedly until View and Select appears on the display.
4
Press .
5
Press to continue.
6
Press or to navigate through the photos.
7
Press to select a photo for printing.
8
If you want to edit the photo:
a
Press . For more information, see "Using the Photo Edit Mode menu" on page 16.
b
Make your changes.
c
Press to save your changes, and then go back to the photo selection screen.
9
Press or to select the number of copies to print.
Note: Pressing when the number of copies is set to 1 will deselect the image. Pressing
not selected will select the image.
10
You can select more photos for printing and editing by repeating step 6 through step 9.
Printing photos
25
when the image is