Table 10-3 System Maintenance Menu Syslog Parameters - ZyXEL Communications Prestige 314 PLUS User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

Table 10-3 System Maintenance Menu Syslog Parameters

PARAMETER
Syslog:
Active
Syslog IP Address
Log Facility
Types:
CDR
Packet triggered
Filter log
PPP log
When finished viewing, press [ESC] or [ENTER] to exit.
Your Prestige sends five types of syslog messages. Some examples (not P314 PLUS specific) of these syslog
messages with their message formats are shown next:
1. CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
Jul 19 11:19:27 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0 40002
Jul 19 11:19:32 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 OutCall Connected 64000 40002
Jul 19 11:20:06 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 Call Terminated
10-8
Press the [SPACE BAR] to turn on or off syslog.
Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Press the [SPACE BAR] to toggle between the 7 different Local options. The log
facility allows you to log the message to different files in the server. Please refer to
your UNIX manual for more detail.
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
No filters are logged when this field is set to No. Filters with the individual filter Log
Filter field set to Yes (menu 21.x.x).) are logged when this field is set to Yes.
PPP events are logged when this field is set to Yes.
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
DESCRIPTION
System Information & Diagnosis