Blinking Lights On The Control Panel - Lexmark 2500 Series Getting Started Manual

Blinking lights on the control panel

blinks rapidly
blinks slowly
light is blinking
light is on
light is blinking
light is on
The printer may:
•
be out of paper in the middle of a print or copy job.
1
Load more paper. See "Loading paper" on page 19.
2
Press to continue printing or copying.
•
have a paper jam.
1
Clear the paper jam. For more information, see "Jams and misfeeds
troubleshooting" on page 50.
2
Press .
The print cartridge carriers are stuck.
1
Raise the scanner unit.
2
Remove any objects blocking the path of the cartridge carriers.
3
Make sure the cartridge carrier lids are closed.
4
Lift the scanner unit, gently push the scanner support towards the cartridge
carriers, and carefully lower the scanner unit until it is completely closed.
5
Press .
If is still blinking slowly:
1
Raise the scanner unit again.
2
Reinstall the print cartridges. For more information, see "Installing print
cartridges" on page 35.
The color print cartridge needs to be replaced soon.
To order supplies, see "Ordering paper and other supplies" on page 40.
The color print cartridge needs to be replaced immediately.
Replace the color print cartridge with a new one. For more information, see
"Changing print cartridges" on page 35.
The black (or photo) print cartridge needs to be replaced soon.
To order supplies, see "Ordering paper and other supplies" on page 40.
The black (or photo) print cartridge needs to be replaced immediately.
Replace the black (or photo) print cartridge with a new one. For more information,
see "Changing print cartridges" on page 35.
Troubleshooting
53