Achieving Better Print Quality - Lexmark 2500 Series Getting Started Manual

7
Press and hold
8
Load the printed alignment page facedown on the scanner glass in the lower right corner, and close the top
cover.
9
Press again to align the cartridge(s).
Note: The scanner unit must be closed to start a new scan, print, copy, or fax job.

Achieving better print quality

Improving print quality
If you are not satisfied with the print quality of a document, make sure you:
•
Use the appropriate paper for the document. If you are printing photos or other high quality images, for best
results use Lexmark Premium Photo Paper or Lexmark Photo Paper.
•
Use a paper that is a heavier weight or bright white.
•
Select a higher print quality.
If the document still does not have the print quality you want, follow these steps:
1
Align the print cartridges. For more information, see "Aligning the print cartridges" on page 37.
If print quality has not improved, continue to step 2.
2
Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge nozzles" on
page 38.
If print quality has not improved, continue to step 3.
3
Remove and reinsert the cartridges. For more information, see "Removing a used print cartridge" on page 35 and
"Installing print cartridges" on page 35.
If print quality has not improved, continue to step 4.
4
Wipe the print cartridge nozzles and contacts. For more information, see "Wiping the print cartridge nozzles and
contacts" on page 39.
If print quality is still not satisfactory, replace the cartridge. For more information, see "Ordering paper and other
supplies" on page 40.
Aligning the print cartridges
1
Load plain paper.
2
Open the Solution Center.
3
From the Maintenance tab, click Align to fix blurry edges.
for three seconds to print an alignment page.
1
Maintaining the printer
2
37