Table of Contents
Advertisement
Warning! When servicing, use only identical
replacement parts. The use of any other part may
create a hazard or cause product damage.
•
DO NOT use solvents when cleaning plastic parts.
Plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease etc.
Warning! Do not allow brake fluids, gasoline,
petroleum-based products, penetrating oils, etc. to
come into contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
•
Remove accumulated dust and debris regularly using a
SOFT and DRY brush.
Warning! Use safety goggles when using an air jet
to blow dust out of the tool. Keep air vents clean
and unobstructed to allow maximum airflow through the tool.
DO NOT abuse power tools. Abusive practices can
•
damage the tool and the workpiece.
Warning! DO NOT attempt to modify tools or
create accessories. Any such alteration or
modification is misuse and could result in a hazardous
condition leading to possible serious injury. It will also void
the warranty.
Lubrication
All of the bearings in this tool are lubricated with a sufficient
amount of high-grade lubricant for the life of the unit under
normal conditions. Therefore, no further lubrication is
required.
Cleaning
Use only mild soap and a slightly damp cloth to clean your
angle grinder. Many household cleaners contain chemicals
which could seriously damage the plastic. Also, do not use
petrol, turpentine, lacquer or paint thinners or similar
products. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be
performed by authorized service centers or other qualified
service personnel, always using identical replacement parts.
(Original instructions)
Specifications
Power
Voltage
Frequency
No-load speed
Weight
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
STANLEY provides a facility for the collection and recycling
of STANLEY products once they have reached the end of
their working life. To take advantage of this service please
return your product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the
address indicated in this manual. Alternatively, a list of
authorised STANLEY repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
ENGLISH
STDR5206
520W
220-240V
50/60Hz
4500/min (rpm)
3.3lb (1.45kg)
9
Advertisement
Table of Contents
