Ec Declaration Of Conformity - Stanley STDR5206 User Instructions

ENGLISH

EC declaration of conformity

MACHINERY DIRECTIVE
STDR5206
STANLEY declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN60745-2-2
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
12.2014
10
(Original instructions)
Guarantee
STANLEY Europe is confident of the quality of its products
and offers an outstanding guarantee for professional users of
the product. This guarantee statement is in addition to and in
no way prejudices your contractual rights as a private
non-professional user. The guarantee is valid within the
territories of the Member States of the European Union and
the European Free Trade Area.
Two years full warranty
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY Europe guarantees to replace all
defective parts free of charge or – at our discretion – replace
the unit free of charge provided that:
•
•
•
•
•
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY
office at the address indicated in this manual. A list of
authorised STANLEY repair agents and full details of our
after sales service is available on the internet
at:www.stanleytools.com
The product has not been misused and has been used in
accordance with the instruction manual.
The product has been subject to fair wear and tear;
Repairs have not been attempted by unauthorised
persons;
Proof of purchase is produced.
The STANLEY product is returned complete with all
original components