2-Sided Printing/Duplex; Binding Preferences; Source - TallyGenicom 9040 User Manual

Paper Tab
Windows Operations
3. Click OK.

2-Sided Printing/Duplex

The printer can automatically print on both sides of paper when the optional Duplex module is
installed. See"Paper Types" on page 2-6 for information about what paper cannot be duplexed.
To print on both sides of the paper from the your Printer Properties:
1. Select the Paper tab within your Printer Properties.
1. Select Long-edge or Short-edge from the 2-sided printing pull-down.
2. Verify the page orientation and select the desired tray.
3. Click OK.

Binding Preferences

You can select how the printer will orient the page layout when duplexing. Depending on your
page orientation, duplexing on the long-edge or short-edge of the paper produces different
results. The diagram below illustrates these results.

Source

You can select the input tray from which paper is used to print the job.
To select the paper source through your Printer Properties:
1. Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2. Select the desired tray from the Source pulldown.
NOTE: If there are no paper trays that match the automatic tray selection, an error message prompting for
replenishment of paper is displayed.
3. Click OK.
4. Click OK.
4-10
Portrait Portrait
Long-edge Short-edge
Landscape Landscape
Short-edge Long-edge
User Guide