Table of Contents
Advertisement
Operator Panel Menus
Operator Panel
Menu Item
Auto Resize
Separator Page
Custom Size Unit
Edge to Edge
Interface Menu
The Interface menu provides a variety of options for port setup and network configuration.
Items available in this menu are described below
Menu Item
Port
Parallel
Serial
Network Card 1
USB
Parallel Setup
Interpreter
Format
3-8
Value
Default
On/Off
Off
Off
Off
Tray 1
Tray 2
Tray 3
Tray 4
Inches
Inches for 110V
Millimeters
mm for 230V
On/Off
Off
Value
Default
On/Off
On
On/Off
On
On/Off
On
On/Off
On
Auto Switch
Auto Switch
PCL
PostScript 3
Raw
Raw
Normal
Binary
Description
Scale the output of a PS job to the size
selected. It does not scale a PCL job.
The printer can automatically select the
paper that is the closest in size to the paper
requested by the printer job. The printer will
then scale the job to fit the available paper.
This includes scaling A4 to letter and letter
to A4.
Prints a blank page between print jobs.
Set the unit of measurement for the Custom
Paper Size feature.
Enables a printing to the physical edge of the
paper on all four sides.
Description
Enable or disable operations from any I/O
interface.
Configure the operation of the parallel
interface.
Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = "Adobe Standard Protocol" (ASP)
Binary = "Binary Control Protocol" (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
User Guide
Advertisement
Table of Contents
