Daily Timer - Daikin FTK09NMVJU Engineering Data

EDUS041502

DAILY timer

After programming, the system starts and stops each day at the preset times. Two pairs of time settings
can be programmed.
(Example: 8:00
1
Press
2
Make the ON and OFF time settings.
Program example: 8:00
Settings
ON time setting
When the timer
used, save the setting
as
1
OFF time setting
ON time setting
When the timer
used, save the setting
as
2
OFF time setting
3
Press
Note
If the following appears on the display, the timer must be reprogrammed.
This means that Timers
programmed for the same time settings.
New time settings must be made.
14
Split Type Air Conditioners FTK(X)-N Series
~ ~
10:00, and 18:00 23:00)
to select the DAILY timer.
~
10:00, and 18:00
Procedure
is not
1
is not
2
. The DAILY timer is now programmed.
The 24-hour timer display
is blinking.
and are
DAILY timer indication appears.
lights up.
Take the steps from
~
23:00
Press Press
The 24-hour timer display
is blinking.
This means that the timer has not been
programmed yet.
Optional Accessories
to .
to make the
timer setting.
147