Notices - Lexmark OptraImage 232 Setup Manual

Notices

Emission Notices
Warning!
This is a Class A product.
In a domestic environment, this product
may cause radio interference, in which
case the user may be required to take
adequate measures.
Industry Canada
30
The following notices apply to machine type 4036-301.
The following telecommunications notices apply to those
machines in which the MarkNet print server is installed.
FCC Rules -- Part 15
The MarkNet print server has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules
(Federal Communications Commission).
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
The FCC Class A limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will
be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television
interference caused by using other than recommended cables or by
unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user's authority to operate this
equipment.
This Class A digital apparatus complies with Canadian ICES-003.
ICES-003
OptraImage Setup Guide