Lexmark OptraImage 232 Setup Manual page 20

Enable fax server
Enabling the fax server function disables
the analog fax send function.
If Fax Server is already selected, simply
press the Configuration button.
20
When this mode is enabled, instead of using the modem to
function
send outgoing faxes, the phone number is incorporated into
the e-mail address of the Fax Server and an e-mail is sent to
the fax server with the fax image as an attachment.
1
Type the IP address of the OptraImage in the URL field of
your browser (for example, http://192.168.236.24), and
then press Enter.
2
Click Configuration.
3
Click Fax Setup under the OptraImage menu.
4
Select Fax Server and click Submit.
5
Enter the settings for Fax server.
OptraImage Setup Guide