Lexmark OptraImage 232 Setup Manual page 23

Create permanent
FTP destinations
Before you create a destination, check
the list at the bottom of the Web page.
Make sure your recipient is not already
listed.
You can rapidly find your FTP recipient
by pressing # and entering the shortcut
number on the OptraImage control
panel.
OptraImage Setup Guide
Create a separate recipient entry for each destination and
give them unique names easily identified in the destinations
list.
1
Type the IP address of the OptraImage in the URL field of
your browser, and then press Enter.
2
Click Configuration.
3
Under the OptraImage heading, click Manage
Destinations.
4
Click FTP Destinations Setup.
5
Enter a unique name for the destination.
6
Enter Server name, Log-in, Password and Filename.
7
Select scan type and resolution.
8
If you want, assign a shortcut number (1- 245) to the
destination (optional).
9
Click Add/Modify. This new destination is now available for
selection from the OptraImage control panel menu.
23