I/O Clock Card; Option Plates; Analog Input Card; Analog Output Card - Lexicon 960L Owner's Manual

The Mainframe
The Rear Panel,

I/O Clock Card

MIDI Connectors (Five-pin DIN female)
• MIDI In
Accepts MIDI data from other MIDI-equipped
devices.
• MIDI Thru
Retransmits, unchanged, MIDI data received
at the MIDI In connector.
• Midi Out
Transmits MIDI data generated or modified
by the 960L.
TTL WordClock (BNC)
• Input Loop
Allows the 960L to be synchronized to other
studio equipment.
• Output.
Allows studio equipment to be synchronized to
the 960L.
Note: The 960L can also derive wordclock from
AES input 1-2, or generate it internally.
Remote-Control Connectors
The LARC2 must be connected to the Remote 1 9-pin
D-connector. The 960L Remote connectors are for use
only with the LARC2 controller.
:
Important
Never connect either Mainframe remote port to
anything other than LARC2. Doing so may damage
your equipment.

Option Plates

Reserved for future use.
1-2
continued

Analog Input Card

The 960L's analog audio input card has eight female
XLR connectors, all electronically balanced.
impedances and signal levels, see the Specifications
Section near the end of this manual.

Analog Output Card

The 960L's analog audio output card has eight male
XLR connectors, all electronically balanced.
impedances and signal levels, see the Specifications
Section near the end of this manual.

AES I/O Card

The 960L's digital audio inputs and outputs are
combined on one card holding four XLR two-channel
female connectors for AES input and four XLR two-
channel male connectors for AES output.

Mains Power Switch

This switch turns the power in the 960L completely
off or on.

Mains Voltage Selector

Before connecting the 960L Mainframe to power mains,
make sure the setting matches your local mains voltage.
Refer to the Installation section of this chapter for more
information.

IEC Power Connector

Accepts IEC power cords with mains plugs specific to
your country.
Lexicon, Inc.
For
For