Lexicon 960L Owner's Manual page 43

960L Owner's Maunal
Editing,
Continued
• Pressing the J-STICK soft button pops up a
numbered list of the two joystick axes and their
assigned parameters (Figure 4-22). To assign
your selected parameter to a joystick axis, type
• Pressing the SELECT soft button pops up a
numbered list of the algorithms applicable to
your current configuration (Figure 4-23). If you
select an algorithm here(by typing its number on
the Numeric Keypad), a default Program will be
loaded that is "typical" for that algorithm.
Figure 4-22 — Edit V-Page screen; programming the joystick
Figure 4-23 — Select Algorithm screen
the axis number on the Numeric Keypad.
Note: You must already have selected a parameter
before you get to this screen.
Note: This is a regular Program load and will destroy
any parameter edits or V-Page creation you've done, if
you haven't previously saved your work.
Operations in Detail
4-15