Cleaning The Image Sensor - Pandigital PhotoLink PANSCN01 User Manual

Cleaning the Image Sensor

1. Follow the instructions on page 19 to clean
the outer casing of the scanner first.
2. With the scanner power off and
disconnected from the power supply, insert
the sensor cleaning swab into one end of
the output slot.
Note: Make sure that there is no visible dust
on the swab before inserting it into the output
slot.
3. Gently slide the sensor cleaning swab to
the other end of the output slot.
4. Repeat step 3 two or three times
consecutively.
Note: Do not apply too much force on the
swab.
5. Remove the sensor cleaning swab, store it
in a safe place and keep it away from dust.
20