Basic Operation - Russound X5 Installation Manual

BASIC OPERATION

Settings
Audio - From the home screen, scroll to and select "settings," and choose
"audio settings." You'll see items to adjust, such as bass, treble and balance.
Each selection has its own screen and shows levels for real-time adjustments.
Clock
• Set Time - From the Clock menu, select "Set Time." Press the +/- buttons to
move through numbers. Press the |< or >| buttons to move the cursor and
press OK to save.
• Set Date - From the Clock menu, select "Set Date." The date format is month/
day/year. Press the +/- buttons to move through numbers. Press the |< or >|
buttons to move the cursor, and press OK to save.
• Clock Format - From the home menu, select "Settings," then "Clock." Choose
"Clock Format," and select 12 hour (AM/PM) or 24 hour (1200) format.
Display - Set the contrast and brightness for the keypad display. Use the
buttons to move the cursor to the desired level.
Installer Options
• Diagnostics (Version) - This screen displays fi rmware versions for the
controller and the keypad, and the keypad's boot loader version.
• IR Enable/Disable - The default is enabled. If an external IR receiver is used,
the keypad IR receiver should be disabled. From the home menu, select
"Settings," then "Installation," then IR Enable/Disable. Select "disable" and exit
back to the menu.
• Network Settings - This screen displays an IP and MAC address for the
XStream X5 when the controller is connected to a network. This screen also
provides diagnostic messages when IP assignment is incomplete. From the
Home screen, choose "Settings", then "Installation." From the Installation menu,
choose "Network Settings" to see the controller's IP address and MAC address.
20 Russound X5 Controller Streamer Amplifi er Installation Manual