Scs Software Programming - Russound X5 Installation Manual

SCS SOFTWARE PROGRAMMING

Note: detailed information can be attained in the help menus within SCS
Items to be programmed with SCS software include:
Zone (room name) and Source Names - a list of predefi ned names for
both are available and will be visible upon keypads and My Russound App.
Custom naming is also possible following the character parameters.
Source Exclusion – enables or disables the set of sources available to each
audio zone.
All ON Participation - defi nes whether or not the zone will respond to All
ON commands from X5' connected on the network.
Power Management of Sources - enabled / disabled per source. If
enabled, the 12VDC trigger will turn on when the X5 is turned on.
The Source IR command feature will also be sent as part of the power
management feature. The source will turn off 5 minutes after the last zone
is turned off . This feature uses IR commands and audio signal sensing to
power up sources and initiate audio to confi rm source power states.
Sound Controls - Adjust Bass, Treble, Balance, and Loudness initial settings.
Fixed / Variable Line Output - Determines if zone preamp output gain is
at a fi xed level or controllable with the zone volume adjustment.
IR Learning - Source IR codes can be learned, saved, and managed.
IR Macros – Source IR codes can be programmed together in a sequence to
transmit as many as 30 IR commands from a touch of button.
IR Universal Code Library – Universal commands are stored in the X5
database to simplify programming.
FIRMWARE UPDATE - If an update is released, it will be available online at
www.russound.com. Firmware updates are available via IP and USB download.
You can use SCS to check for updates.
42 Russound X5 Controller Streamer Amplifi er Installation Manual
IR Learning