Zone 12Vdc Trigger Outputs - Russound X5 Installation Manual

There is one 12VDC trigger on the back of the XStream™ X5. The 3.5mm jack
provides 12VDC 100mA when the X5 is turned on and is disengaged when
the zone is turned off . The trigger can be used to engage any 12VDC trigger
device or component that does not exceed 100mA such as a subwoofer or
Subwoofer
12V Trigger Cable
RCA Cable
RCA Cable
Russound X5 Controller Streamer Amplifi er Installation Manual
another amplifi er. The connection for the trigger output is made using a two-
conductor cable with 3.5mm male mono plug at each end. The tip is positive
(+) and sleeve is negative (-).
Set the Line Output to Variable in the SCS menu.

ZONE 12VDC TRIGGER OUTPUTS

39