Setting Up X5 - Russound X5 Installation Manual

1. Unpack the X5 and all of its contents:
1 X5 Controller Streamer Amplifi er
1 Power cord
2 Wi-Fi antennas
1 IR emitter
2. Screw the two antennas on the antennae posts as shown
3. Remove the detachable speaker connector from the X5
Russound X5 Controller Streamer Amplifi er Installation Manual
4. Strip back 1/8" of the insulation on the speaker wire and twist the end of
each wire to tighten the bundle of copper strands on each wire.
Snap connector
5. Place the stripped end of the wire into the appropriate terminal and
collapse the latch. Check to make sure there are no strands of copper showing
and check the security of the wire in the connector. Between each terminal,
take caution to not let the wire fray or touch another connection.
6. Connect the other end of the wire to each speaker. Be careful to maintain
polarity.
7. Re-connect the detachable speaker terminal.
SETTING UP XSTREAM X5
Speaker wires
7