Fujitsu PRIMERGY TX300 S3 Options Manual page 66

Installing the SAS/SATA HDD extension box
Figure 57: Connector Con3- SAS/SATA HDD extension box
Ê Connect the plug Con3 of the PS cable to the backplane of the SAS/SATA
HDD extension box.
Ê Install a slimline floppy disk drive/or a LocalView module, a slimline DVD
drive and SAS/SATA hard disks (see the descriptions before and for
SAS/SATA hard disks see the operating manual).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
66
79ff.
Options Guide
Accessible drives
TX300 S3