Fujitsu PRIMERGY TX300 S3 Options Manual page 46

Installing the ROMB upgrade kit
Figure 31: Connecting the BBU
Ê Connect the BBU to the cache module (see arrow).
Figure 32: Installing the cache module
Ê Press the holders on either side of the mounting location outward.
Ê Install the cache module in the mounting location.
Ê Press the holders on either side of the mounting location inward until they
engage.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
I
Information on the configuration is provided in the Technical Manual for
the system board.
46
ROMB (RAID on motherboard)
79ff.
Options Guide
TX300 S3