Imap(S) Setting - D-Link DFL-900 User Manual

DFL-900/1500 User Manual
The port which the data goes into or out of the POP3(s) server. For instance,
Server Port
POP3 service uses port 110 and POP3s service uses port 995.
Encryption is the process of changing data into a form that can be read only by
the intended receiver. Secured Sockets Layer is a protocol that transmits your
communications over the Internet in an encrypted form. It ensures that the
Encryption
information is sent, unchanged, only to the server you intended to send it to.
Therefore, if you use port 995 (POP3s) as your server port, you have to check
SSL checkbox.

6.3.3 Imap(s) Setting

Step 1. Configure Imap(s) Settings
Click Authentication Type as Imap(s).
Enter Server IP and Server Port. Check the
Encryption as SSL. Click Apply to store the
settings. Note, if you enter server port as 143
(IMAP), don't check the SSL checkbox.
FIELD
Server IP The IP address of the IMAP(s) server.
The port which the data goes into or out of the IMAP(s) server. For instance,
Server Port
IMAP service uses port 143 and IMAPs service uses port 993.
Encryption is the process of changing data into a form that can be read only by
the intended receiver. Secured Sockets Layer (SSL) is a protocol that transmits
your communications over the Internet in an encrypted form. It ensures that the
Encryption
information is sent, unchanged, only to the server you intended to send it to.
Therefore, if you use port 993 (IMAPs) as your server port, you have to check
SSL checkbox.
Table 6-1 POP3(s) Settings
Basic Setup > Authentication > Authentication > Imap(s)
DESCRIPTION
Table 6-2 IMAP(s) Settings
57
Chapter 6
Authentication
110
EXAMPLE
10.1.1.1
993
SSL