Snmp Control - D-Link DFL-900 User Manual

DFL-900/1500 User Manual

4.4.5 SNMP Control

Step 1. Setup SNMP Control
Through setting the related information in this
page, we can use SNMP manager to monitor the
system status, network status of DFL-1500.
FIELD
Enable SNMP
System Name
System Location
Contact Info
Get community
Set community
Trusted hosts
Trap community
Trap destination
SYSTEM TOOLS > SNMP Control
Enable the SNMP function or not.
The device name of DFL-1500.
The settled location of DFL-1500.
The person who takes charge of the DFL-1500.
The community which can get the SNMP information. Here
"community" is something like password.
The community which can set the SNMP information. Here "community"
is something like password.
The IP address which can get or set community from the DFL-1500.
The community which will send SNMP trap. Here "community" is
something like password.
The IP address which will send SNMP trap from the DFL-1500.
Table 4-8 SNMP Settings
DESCRIPTION
49
Chapter 4
System Tools
EXAMPLE
Enabled
DFL-1.dlink.com
Office
mis
public-ro
private-rw
192.168.1.5
trap-comm
192.168.1.5