Firmware Upgrade From Web Gui - D-Link DFL-900 User Manual

Part IX
System Maintenance
Step 1. Setup TFTP server
Place the TFTP server TftpServer in the c:\
directory and double click to run it. Place all bin
files in the c:\ as well. Set the PC to be
192.168.40.x to be in the same subnet with the
DFL-1500's LAN1. Login to DFL-1500's console.
Enter en to enter privileged mode. Configure the
LAN1 address so that the DFL-1500 can connect
to the TFTP server. The CLI command to
configure LAN1 interface is ip ifconfig INTF3
192.168.40.254 255.255.255.0.
Step 2. Upgrade firmware
Enter IP tftp upgrade image 192.168.40.x
After this procedure,
DFL-1500-<ver>.bin.
DFL-1500 device will reboot automatically.
Notice: if you want to preserve the previous
configuration, add the "preserve" keyword to
the end.
Refer for the details.
Appendix A
Step 3. Check if OK
Check whether the system status is working
properly or not.

29.3 Firmware upgrade from Web GUI

Step 1. Download the newest firmware
from web site
If a new firmware issued, we can download it
from the web site (fwupdate.dlinktw.com.tw)
to the local computer.
D-Link
NetOS/i386 (DFL-1500) (tty00)
login: admin
Password:
Welcome to DFL-1500 VPN/Firewall Router!
DFL-1500> en
DFL-1500# ip ifconfig INTF3 192.168.40.254 255.255.255.0
DFL-1500#
DFL-1500# ip tftp upgrade image DFL-1500-2.001-ALL.bin
192.168.40.170 preserve
Fetching from 192.168.40.170 for DFL-1500-2.001-ALL.bin
tftp> tftp> Verbose mode on.
tftp> getting from 192.168.40.170:DFL-1500-2.001-ALL.bin to
DFL-1500-2.001-ALL.bin [octet]
http://fwupdate.dlinktw.com.tw/
230
Firmware upgrade site：