Part IX
System Maintenance
29.6 Save the current configuration
Step 1.
Backup the current
configuration
After finishing the settings of DFL-1500, be sure
to Press the Save button in this page to keep the
running configuration.
29.7 Backup / Restore Configurations
Step 1.
Backup the current
configuration
Before backup your current configuration, make
sure you have saved your current configurations
as described in Section 29.6. Then select page in
the page of /System Tools /System Utilities
/Backup Configurations, click Backup button to
backup configuration file to local disk.
Step 2.
Restore the previous saving
configuration
In the page of System Tools / System Utilities /
Restore Configuration, click the Browse button to
select configuration file path first, and then click
Upload button to restore configuration.
What will it happen if there is an accident during the process as the following list while restoring configuration?
Accident
The network line is broken.
The DFL-1500 powered off or
rebooted.
Table 29-2 The result while an accident happens during the configuration restoring.
D-Link
SYSTEM TOOLS > System Utilities > Save Configuration
SYSTEM TOOLS > System Utilities > Backup Configuration
SYSTEM TOOLS > System Utilities > Restore Configuration
The configuration restoring will fail. After rebooting the DFL-1500, it will remain the
original configuration. It seems that there is no configuration restoring before.
The configuration restoring will fail. After rebooting the DFL-1500, it will remain the
original configuration. It seems that there is no configuration restoring before.
234
What will it happen?