Part V
Virtual Private Network
2.
Create an IPSec policy, please refer 20.4.3 description.
3.
Add a filter rule from WinXP to DFL-1500, please refer 20.4.4 description.
4.
Add a filter rule from DFL-1500 to WinXP, please refer 20.4.5 description.
5.
Configure a rule for WinXP client to DFL-1500, please refer 20.4.6 description.
6.
Configure a rule for DFL-1500 to WinXP client, please refer 20.4.7 description.
7.
Enable the security settings, please refer 20.4.8 description.
20.4 Steps
20.4.1 DFL-1500 Setup
Step 1.
Add an IPSec rule
At the DFL-1500 side, we need to add an IPSec
policy to establish IPSec tunnel with WinXP client.
Enter the related IPSec parameter in the suitable
field. For the field description, please refer
13-4
for details. Note that because the remote
client is just a single WinXP machine, so we
select Single Address in the Remote Address
Type field.
D-Link
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
Table
162