Table of Contents
Advertisement
38
POls that you have saved can be edited to change the icon, visibility, name, elevation, and
message. You can also change the location, but keep in mind that this effectively is creating
a new POI in a new location. If the POI you are editing is used in a route, the changes made
to the POI will not be reflected in the route.
1.
Press MENU.
2.
Use the Arrow joystick to highl ight
Pts of Interest.
3.
Press ENTER.
4.
Use the Arrow joystick up/down to highlight My
Pts of Interest.
5.
Use the Arrow joystick left/right to select
Nearest
or
Alphabetical.
6.
Press ENTER.
7.
Locate the file where the POI has been saved and press ENTER. (The eXplorist will
automatically open the default fi Ie.)
8.
Highlight the POI and press ENTER.
9.
Use the Arrow joystick to highlight
Edit POI.
10. Press ENTER.
11. Use the Arrow joystick to highlight the field you want to
change.
12. Press ENTER.
13a. If the Icon field is selected: Use the Arrow joystick to select
the icon desired and press ENTER. To aid in your selection,
the type of icon selected is displayed in the information
block at the top of the keypad.
13b. If the Name field is selected: Use the Arrow joystick to
select the character desired and press ENTER. If you make
a mistake, highlight
Back
and press ENTER. To access the
Editing an existing POI
lower-case characters, highlight
Shift
and press ENTER. To
with the Vis field
clear everything and start over, highlight CLEAR and press
highlighted
ENTER. When you are satisfied with the name, highlight
OK
and press ENTER.
Note: User-entered POI names can be up to 20 characters long (including spaces).
13c. If the Message field is selected: Use the keypad displayed, just as was described
in 13b, to enter a message for this POI.
13d. If the Vis (Visibility) field is selected: Press ENTER. Select
On
or
Off
and Press
ENTER.
14. When the Icon, Name and Message fields are ready, use the Arrow joystick to
highl ight
Save.
15. Press ENTER.
Advertisement
Table of Contents
