Magellan eXplorist Basic User Manual page 113

Hide thumbs Also See for eXplorist:
Table of Contents

Advertisement

82
I
OK
I
Turn it on
: Transfer: range>' · ··········:,:··················,··········,·,,··
,
"........................................................•................................................................. , .
6.
Click on the OK button.
7.
Select the location for the fi Ie to be saved.
(By default this is the 'Geocaches' folder
in the internal memory or on the SD card.)
8.
If the transfer is successful, an alert will
be displayed.
9.
You are now able to access and create a GOTO to any of the geocache points
following the instructions for creating a GOTO. (Geocache points can also be used
in multi-leg routes but the most common usage will be in a GOTO.)
Uploading to the Magellan eXplorist
1.
Turn the eXplorist off and connect it to the USB port on your computer.
2.
Turn the eXplorist on. If connected correctly, it will begin in the USB File Transfer
mode or the Communications menu is displayed. (If the Communications menu is
shown, select USB
File Transfer
and press ENTER.) If neither of these screens is
displayed there maybe a bad connection. Turn the eXplorist off and check the
connections and try again. The eXplorist must be in the USB File Transfer mode
for geocache points to be uploaded.
Note: By default the eXplorist will save to its internal memory. If you want to save
to the SD card instead, from the USB File Transfer screen you need to:
Press ENTER
Highlight USB
File Transfer
and press ENTER.
Highlight SD
Card
and press ENTER.
3.
Select the files to be uploaded. (If no files are selected, it is assumed that you
want to upload the entire list.)
Ti ps on selecti ng fi les:
To select a single geocache point, click on the name.
To select multiple, consecutive geocache points, hold the Shift key down while
clicking on the geocache point names.
To select multiple, non-consecutive geocache points, hold the Ctrl key down
while clicking on the geocache point names.
4.
Click the Upload Icon on the Magellan Geocache Manager.
5.
Make sure that the correct radio button is
selected (All Geocaches or Selection).

Advertisement

Table of Contents
loading

Table of Contents