Magellan eXplorist Pro 10 Quick Start Guide ® ® MiTAC Digital Corporation 471 El Camino Real, Santa Clara, CA 95050 USA www.magellanGPS.com Touch Pro 10 QSG.indd 1 1/11/2011 10:11:39 AM...
Safety Notice The Magellan eXplorist Pro 10 is a navigation aid designed to assist you in arriving at your selected destination. When using the Magellan eXplorist receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others.
Page 3
Magellan eXplorist Pro 10 [A] Power Button: Press and hold for 2 seconds to turn the receiver on. Press again to bring up the Power Options menu. Pressing and holding the power button down for 5 seconds will reset the receiver.
Installing Batteries The Magellan eXplorist Pro 10 is powered by two AA batteries. Alkaline, lithium or rechargeable batteries may be used but both batteries must be of the same type. Battery Door Removal Raise the arm [A]. Turn the battery door lock counter clockwise a quarter turn.
Connecting to the USB Port The Magellan eXplorist Pro 10 can be connected to a personal computer or external power using the USB connector located at the bottom of the receiver in the back. It has a rubber cover to protect the connector from water or dirt and should always be closed firmly when not being used to connect the receiver to a remote device.
Installing a micro SD Card A micro SD card can be installed in the Magellan eXplorist Pro 10 to store and retrieve data. Please see your application instructions for details on how to save to or access data from the micro SD card.
Using the Camera The Magellan eXplorist Pro 10 has a built-in camera that can be used to take photographs as an internal function of the applications installed. See the user manual for the application installed for information as how the camera functions with the application.