Magellan eXplorist Basic User Manual page 11

GOTO ·aDestination
You can use your eXplorist receiver to go to ("GOTO") any
destination in your POI database. This can be one of the pal's
that was preloaded in your eXplorist receiver, a geocaching
point or a POI that you have saved. Once a GOTO route has
been defined, your eXplorist receiver will guide you in a straight
line to your destination. If you need to move away from the
suggested path, the eXplorist receiver will continuously update
the route, keeping you headed towards your destination.
Setting a GOTO Route
From any screen, press __
Goro.
Select the topic in your database where the
POI is located. Highlight the topic that con-
tains the POI you are looking for is in. Use
the left or right arrows on the joystick, select
Alphabetical or Nearest.
Choose the POI that you want to go to and
press .. Enter. The information at the bottom
of the screen is the bearing and distance to the
highlighted POI from your present position.
..emol·y\My Poi\default
ItJ
Up One Level
:$.g.)(ej••
1$-
POI002
The last viewed
Nav
screen is displayed and the eXplorist
receiver begins computing the navigational information
required to get you to your destination.
Some navigational information that is
computed requires that you be moving for it to
be calculated. When that information is not
being calculated, the navigational fields will be
fi lied with dashes.