Table of Contents
Advertisement
17
The Map screen in the
Cursor Mode
In the Cursor mode, you have a cursor icon displayed that you can use
.~!
....
~
. ...
~~~~~~~,::j
to pan around the map. The information displayed at the bottom of
the screen provides you with the heading and distance of the cursor
from your present position. In the Cursor mode you can:
• scroll around the map, checking available information for areas
on the map not displayed around your present position
• create a POI for the position indicated by the cursor
• create a GOTO route to the position indicated by the cursor
location
• get detailed information about POls or map objects found at the
cursor location
These options will be explained in the section of this manual on creating POls and GOTO
routes.
To enter the Cursor mode, use the Arrow joystick to move the cursor. As soon as the
joystick is moved, a crosshair cursor is displayed and the bottom of the screen changes to
provide information about the cursor position.
To exit the cursor mode, press the ESC button. When pressed, the
Map
screen is returned
to the Position mode, with your present position displayed in the center of the screen.
Showing or Hiding Map Information
The information at the bottom of the
Map
screen provides you with information that can be
used to assist you in navigating to your destination. However, you may want to display more
of the map and may not need this information. The eXplorist gives you the capability to
turn this information on or off.
1.
While viewing the
Map
screen, press MENU.
2.
With
Hide Map Info
or
Show Map Info
highlighted, press ENTER.
:;
.;.;.;.;.:-:-:-:.:.;.;.;.;.:-:,
..
;
...
:..:..:.:..:.;.;.;.;.;.;.:.;.:..:.:.;.:.:.:..:.:.:.;..;.;.;:
The Map screen with map
The Map screen with map
information shown
information hidden
Advertisement
Table of Contents
