Table of Contents
Advertisement
b. Use your thumb and index finger to lift the battery from the socket.
7. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket.
b. Press the battery down into the socket until it clicks into place.
8. Replace the PCI riser assembly and replace the cover. (See "Cover removal
and replacement" on page 49 and "Cover removal and replacement" on
page 49.)
9. Connect all external cables; then, connect the power cords.
10. Turn on the server.
11. Start the Configuration/Setup Utility program and set configuration parameters
as needed. See the User's Guide on the IBM xSeries Documentation CD.
Chapter 5. Service replaceable units
77
Advertisement
Table of Contents
