Table of Contents
Advertisement
10. Replace the PCI riser assembly (see "PCI riser assembly removal and
11. Replace the cover (see "Cover removal and replacement" on page 49).
12. Reconnect the external cables and power cords. Turn on the attached devices,
64
IBM eServer xSeries x382 Type 8834: Hardware Maintenance Manual and Troubleshooting Guide
6. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the server; then, remove the new DIMM from the package.
7. Gently open the retaining clip on each end of the DIMM slot. Turn the DIMM
so that the pins align correctly with the connector.
8. Insert the DIMM into the connector. Firmly press the DIMM straight down into
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, and then reinsert it.
9. If you have other options to install or remove, do so now.
replacement" on page 57).
and turn on the server.
DIMM 4
DIMM 3
DIMM 2
DIMM 1
Advertisement
Table of Contents
