Canon LBP-860 Service Manual page 83

4. Error messages
If an error occurs and correct printing is not guaranteed, an error message Is displayed. When
the ON LINE key is pressed (error skip), printing may be possible in some cases, but correct
printing is not guaranteed. To print correctly, take the appropriate action and send the print
data again. If an error occurs and this message is displayed, the printer stops printing and
goes off line.
21 LOW RESOL.
22
LINE ERROR
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Development resolution reduction
The printer cannot utilize 600 dpi when
there is complicated or excessive data on
page. This unit can only print 300
dpi in this case.
Data IS not prlnied correctly even if the
resolution is reduced.
data on one cannot be printed
even if the resolution is reduced to 300
dpi.
Receive buffer memory overflow
Even though the printer Is busy (I. e..
not ready to receive data from the
continues sending data to the printer,
and the temporary memory [receive
buffer) overflows.
resolution of 600 dpi. install
optional RAM SIMMs (4 MB
usage" to "FULL PAINT' In
the printing environment.
When the ON LINE key is
pressed, printing continues.
However. correct image
printing is not guaranteed.
Advice the customer to add
an optional RAM SIMM. If
this error occors when Legal
that data is printed with a
resolution of 300 dpi.
Install optlonal RAM
set the "memory usage" to
"FULL PAlN'l"' in the printing
guarantees that data is
printed with a resolution of
600 dpi.
Press the ON LINE key to
continue processing.
Overflow data is not printed.
frequently, check the
connection of the interface
cable between the external
device and the printer, and
check interface conditions.
connection or
interface condition are not
properly functioning, set the