Canon LBP-860 Service Manual page 106

Paper Pick-up Unit
Removing the paper pick-up unit
the cassette.
side trl LhP prinler.
Figure 3-18
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
8) &move
the two screws, disconnect the
two connectors, and pull the paper
pick-up unit forward and out.
Figure 3-19
Note:
replace the paper pick-up
unit. make several test prints and
is 2.0 mm. II it is not, adjust il.
(See page 6-9)
Disassembly and reassembly
a. Pick-up motor
Disconnect the connector, remove the
motor.
Figure
CHAPTER 3
3-20