Table of Contents
Advertisement
3. Operation Keys
You USC the operation keys to control the basic functions of the printer.
You use the ON LINE key to switch the printer between on-line and off-line. The printer must
be on-line to receive information from your computer. To use any of the other keys on the
operator panel, the printer must be off-line.
The message PCL READY appears in the display window when the printer is on-line and ready
to receive data.
READY
You use the FORM FEED key to print the data stored in the printer' s buffer. For example. if the
last page stored in the printer' s memory is a full page but your software does not send a
command to print it, you can press ON LINE to set the printer off-line and then press FORM
FEED to print the last page.
Keep in mind that complex pages may take several minutes
indicator light has stopped flashing before you press FORM FEED lo print the last page.
The printer must be off-line before yoou press FORM FEED.
Pressing the FORM FEED key does not force a blank sheet through the printer.
You use the RESET key to clear the printer' s buffer and remove all temporary typefaces and
macros from the printer' s memory.
After you change a menu item, you may see the RESET TO SAVE message. If so, press RESKT
to make your menu selections the permanent default settings. The message RESET appears in
the display window. ***Can we be more specific here? When does lhe RESET TO SAVE message
appear? ***
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
ALARM
ON LINE
V
MENU
C O
N U E
Figure 1-13
FORM FEED
RESET
ENTER
process. Make sure the READY
l - 1 5
Advertisement
Table of Contents
Troubleshooting
