Table of Contents
Advertisement
4. Removing the envelope feeder pick-
up roller
1) &move the right, 1eA. and bottom covers.
two
bushings. then remove the pick-up roller.
E-rings
Figure 3-68
3) Kemow Ihe gear from the pick-up roller
shaft. Release the pick-up mller hooks
holding the shaft and remove the pick-
up rollers.
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
E-rings
and
two
the lower separation
5.
Removing
roller, upper separation roller, and
torque limiter
Remove the right, left, and bottom covers.
Remove the screw holding the ground
2)
wire. Release the right and left snaps
with a flat-blade screwdriver, then
remove the upper cover.
Figure 3-69
3)
Remove the two E-rings and two bushings,
then remove the lower separation roller
shaft.
Remove the lower separation roller from
the shaft.
Figure 3-70
Advertisement
Table of Contents
Troubleshooting
