Setting The Remote Control Ids - Panasonic AW-HE40HWP Operating Instructions Manual

Setting the remote control IDs

The wireless remote control (optional accessory) is capable
of operating up to four units.
IDs are used to set which units are selected when the
[CAM1], [CAM2], [CAM3] and [CAM4] buttons on the
wireless remote control have been pressed.
● When operating a multiple number of these units using
wireless remote controls, set a different remote control ID
for each control.
● When using one unit, set the remote control ID to "CAM1"
unless the setting needs to be changed.
Setting procedure
Operate the unit's camera menu or the web screen to select
a remote control ID ([CAM1] to [CAM4]).
The camera's [CAM1] to [CAM4] settings correspond to the
[CAM1] to [CAM4] buttons on the wireless remote control.
(The factory setting is "CAM1".)
For details, see "IR ID" on page 47 of the <Operations and
Settings>.
[CAM1] to [CAM4] buttons
44