Panasonic AW-HE40HWP Operating Instructions Manual page 20

Connections
(continued)
■
System example 1 (connection with commercially available controller,
RS-232C daisy-chain connection)
Commercially
available
controller
RS-232C
connector
* You can connect up to seven cameras to a single controller.
● Configure the service switches at the bottom of the unit.
For details on the service switches, see "Service switch settings" (page 41).
SW1
Camera address
SW2 setting (standard
serial communication)
SW3
Communication
SW4
format
Communication baud
SW7
rate
Communication
SW8
connector
● Configure the following items in the camera menu.
1. Display [System] menu  [Protocol]  [Model Select].
2. Select [SEVIHD1], [SBRC300], or [SBRCZ330] for the protocol type.
20
RS-232C
connector
Supplied AC adaptor
Set to AUTO or 1 to 7.
(Set address numbers so that they do not duplicate each other.)
Enable standard serial communication (ON).
Set to 9600 bps (OFF) or 38400 bps (ON) based on your commercially
available controller.
Set to RS-232C (ON).
HD Integrated Camera
AW-HE40*
Up to 7
Supplied AC adaptor Supplied AC adaptor