Characteristics - Panasonic AW-HE40HWP Operating Instructions Manual

Characteristics

Multiple number of formats supported
● You can switch between the following formats via the
camera menus or a web browser.
Supported formats:
1080/59.94p (HDMI only), 1080/59.94i, 1080/29.97p,
1080/29.97PsF, 720/59.94p, 1080/50p (HDMI only),
1080/50i, 1080/25p, 1080/25PsF, 720/50p
1/2.3-type MOS sensor and high-performance 30x zoom
lens featured
● A newly developed 1/2.3-type MOS sensor and DSP
(digital signal processor) are incorporated.
High-quality pictures are obtained by video processing in
many different kinds of ways.
● In addition to its optical 30x zoom lens, the unit comes
with a 16x digital zoom to achieve high-quality images that
overflow with ambiance.
Using i.Zoom allows up to 40x zoom while maintaining HD
quality.
● The unit is equipped with functions that allow clean
and clear reproduction of images in a wide range of
applications, such as high dynamic range (HDR) and
dynamic range stretch (DRS) functions that compensate
for overexposure and loss of dark detail and a digital noise
reduction (DNR) function that allows you to shoot scenes
clearly by minimizing image lag even in dark locations.
Easy operation of unit enabled by its integration with a
high-performance pan-tilt head unit
● High-speed operations with maximum speed of 300°/s
during preset, and 90°/s during manual
● Wide rotational angles with a panning range of ±175° and
a tilting range from –30° to +90°
● Quiet operation with noise levels of NC35 (normal speed)
and NC40 (during preset)
● Storage of up to 100 positions in the preset memory
(The number of preset memories that can be used varies
from one controller to another.)
Night mode incorporated
● Infrared shooting is supported.
The kind of shooting which is normally difficult under very-
low-brightness conditions is now possible by exposing the
subjects to infrared rays.
(Black-and-white images are output in this case.)
● The iris will be fixed at open.
IP video output function featured
● The unit is equipped with image compression and IP
transmission LSI capabilities. IP video transmission in SD
format is possible.
● Employing the functions of this chip together with
IP control opens the door to uses in a wide range of
applications including the control of the camera from a
remote location.
High degree of compatibility with Panasonic's currently
available controllers, enabling a flexible system to be put
together
● A maximum of five units can be operated by serial control
from one of Panasonic's currently available controllers
(AW-RP50, AW-RP120 and AK-HRP200).
The unit can also be used together with the cameras
and pan-tilt head unit systems currently available from
Panasonic Corporation so that an existing system can be
used to advantage to put together a system that is even
more flexible.
Notes
● It may be necessary to upgrade the version of the
controller in order to support the unit.
● The maximum distances between the units and
controller is 1000 meters (3280 ft). (when serial
control is exercised)
Use of an external device or some other means
must be provided separately in order to extend the
video signal connections.
Standard serial communication support
● Connect up to seven cameras to a commercially available
controller via RS-232C interface.
Integrated pan-tilt head unit, camera and lens to facilitate
installation
● By designing the camera, lens and pan-tilt head as a
single integrated unit, the time taken for the installation
work has been drastically reduced.
Use of easy-to-operate wireless remote control (optional
accessory) is possible
● A wireless remote control capable of operating up to four
units can be used.
It can easily be used to set the various functions or switch
between them while viewing the menu screens.
Flexible camera layout enabled by simple connection
and installation
● The unit features excellent connectivity and installability
thanks to the IP control; a lightweight main unit, and the
turn-lock mechanism, which enables the user to install it
on his or her own (only when used indoors).
Note
● Bear in mind that the unit is designed to be used
indoors only: It cannot be used outdoors.
Easy connections and settings courtesy of IP control
● Up to a hundred units can be operated by IP connection
from a Panasonic controller (AW-RP50, AW-RP120 and
AK-HRP200).
(The maximum length of the LAN cables is 100 meters
[328 ft].)
● By automatically recognizing the IP addresses and
changing their allocation, the previous restrictions on
the connections between the cameras and controllers
using serial interfaces and the time and trouble taken to
establish the various settings can be significantly reduced,
and by configuring a network, flexible camera control can
be implemented anywhere with any of the cameras.
33